Description
- Origin: CN(Origin)
- Fixed Form: Sitting
- Voltage: 220-240V
- Power Source: CHARGE
- Material: Rubber
Features:
1. Durable and Waterproof: The shell is made of high-quality plastic, corrosion-resistant, impact-resistant, durable, acid and alkali resistant. The stator and circuit board of the motor are potted with epoxy resin, which is completely isolated from the rotor, so it solves the problem of water leakage caused by the long-term diving of the water pump, and the pump is completely waterproof. The shaft core is made of high-quality stainless steel. The maximum flow rate can reach 3.5GPM (800L/H), and the maximum water outlet is up to 5 meters/16.4ft.2. Quiet Design: The maximum volume of the circulation pump is 40db. The lightweight mini suction cup is small and lightweight. When the front cover is closed, the suction cup can be easily absorbed on a flat surface, not easy to fall. Besides, it can also keep silent and reduce noise, which help you feel the sound of relaxation and tranquility brought by the water poured from the fountain.
3. Long Service Life: The pump is with 12V-voltage and 1.27 cm external thread. The outer diameter of the brass coupler is 10 mm. With 5521 DC female plug, 1.5 meters data cable and long service life: 20,000 hours.
4. Super Power Saving: It can save more than 50% of electricity than ordinary water pumps, low-voltage power supply, which gives great safety assurance. Pure copper motor, no carbon brush, no pollution, electronic commutation, low heat generation, high efficiency. The pump can be used up to 100°C, need to be recycled, and cannot be used in diving.5. Widely Used: The water pump can be used in small fish tanks, waterscape decorations, hydroponic circulation pumps, pet drinking fountains, humidifiers, miniature fountains and other industrial water circulation, solar water heaters, water circulation pumps, etc.
Specification:
Material: plastic
Purpose: amphibious pump
Structural Principle: centrifugal pump
Drive Mode: electromagnetic
Delivery Medium: clean water pump
Impeller Structure: semi-open impeller
Impeller Suction Method: single suction
Number Of Impellers: 6
Voltage: 12V
Power: 15W
Maximum Lift Head: 5M (16.4ft)
Maximum Flow: 800L/H(211GPH)
Water Inlet Diameter: 20mm/ 0.79 in with 1/2 threaded interface
Outlet Diameter: 20mm/ 0.79 in with 1/2 threaded interface
Cord Length: about 150cm/ 59.06 in with 5521DC female plug
Package Weight: about 220g
Model: QR90H
Material: plastic
Purpose: amphibious pump
Structural Principle: centrifugal pump
Drive Mode: electromagnetic
Delivery Medium: clean water pump
Impeller Structure: semi-open impeller
Impeller Suction Method: single suction
Number Of Impellers: 6
Voltage: 12V
Power: 15W
Maximum Lift Head: 5M (16.4ft)
Maximum Flow: 800L/H(211GPH)
Water Inlet Diameter: 20mm/ 0.79 in with 1/2 threaded interface
Outlet Diameter: 20mm/ 0.79 in with 1/2 threaded interface
Cord Length: with 5521DC plug; about 90cm/ 35.43 in with 5521DC female plug
Adapter: AC/DC Adapter
Input: AC100-240V
Output: DC 12V-2000mAPackage Weight: about 220gInstructions For Use:1. Install the pump in the correct way and connect the correct power and turn on the power.2. Put the pump horizontally and install suction cup on the bottom of the pump to help reduce noise and ibration. And the inlet needs to be fitted with a filter cover for diving.3. If there is less water in the pump or no water, there may be air inside the pump impeller or in the water low pipe. Switch on – off the power repeatedly for several times to eliminate the air in the pump impel and the pipe. If necessary, manually remove the air in the pipe, and it can be restored to normal working condition when the pump discharges water.
Packing List:
1*DC Water Pump
2*Copper Adapter
2*Tighten The Hose Clamp
2*Sealing Gasket
1*Fixed Base
1*Instruction
Notes:
1. Do not connect the power cord +,- pole reversely, otherwise it will damage the pump.
2. Do not use the non-standard power. Because if the voltage is too high, it will damage the pump; And if the voltage is too low, it can cause the pump’s performance to drop or not to work.
3. Do not let the pump to work in a state of water shortage, because idling and dry will damage the pump.
4. Do not put the pump in sediment-laden water as well as viscous and acid-base liquids to use.
5. Do not place the pump in an environment above the temperature indicated on the pump 6. When the pump is used in high temperature environment (60-100 ℃/ 140-212°F), installation only with circulating water.
Reviews
There are no reviews yet.